HIGH POWER SERIES

– High frequency system with advanced technology
– Charging process fully controlled by microprocessor.
– Visualization on a lit display of the charging current, of the battery voltage, of the charging time, of the charge supplied in Ah and of the energy absorbed in KWh.
– Unlimited number of charging curves, voltages an charging currents by smartcard.
– Protection with an output relay against polarity inversions, short circuits, over-voltages or anomalies.
– Indication signals of possible anomalies.
– Insensitive charge parameters of the ±10% AC input line voltage variations.
– Efficiency > 85%.
– Output ripple at maximum charge lower than 100mV.
– Compensation of the voltage drop on the connecting cables to the battery.
– Start of the charge cycle also with 1V batteries.
– Thermal protection against over heating.
– Normally closed auxiliary contact of connected AC input line.
– Forced ventilation with fans at low output currents.

CBHF4

CBHF4

CBHF5

CBHF5

GREEN2

green2

CBHF6

CBHF6

error: Content is protected !!