CBHF SERIES

– High frequency system with advanced technology
– Charging process fully controlled by microprocessor.
– Visualization on a lit display of the charging current, of the battery voltage, of the charging time, of the charge supplied in Ah and of the energy absorbed in KWh.
– Possibility to change the charging curve by means of a dip-switch, choosing from 16 standard pre-programmed curves for lead-acid, Gel and VRLA batteries. Any other curve available on request. – Possibility to change the battery voltage and the charging current by means of a dip-switch.
– Charging process starting in the “soft start” mode and automatic reset upon connection of a new battery.
– Protection with an output relay against polarity inversions, short circuits, over-voltages or anomalies.
– Alphanumeric signals of possible anomalies.
– Insensitive charge parameters of the ±10% AC input line voltage variations.
– Efficiency > 85%.
– Output ripple at maximum charge lower than 100mV.
– Compensation of the voltage drop on the connecting cables to the battery.
– Start of the charge cycle also with 1V batteries.
– Thermal protection against over heating.
– Normally closed auxiliary contact of connected AC input line.
– Forced ventilation with fans at low output currents.
– Self-extinguishing case made of ABS with double insulation.

CBHF1-SM

1

CBHF1-V2

2

CBHD3

3

CBHF2

4

CBHF2-SLIM

5

error: Content is protected !!